A Bit About Me

Believe it or not, I’m not a builder nor do I have a building background; my background is in technology and computers. Why on Earth would you want to read a website and blog written by a technologist about building?

Well, I am a keen DIY’er and whenever possible, I do like to do things myself rather than getting someone in to do it; I’m that guy! I’m also of the opinion that I can pretty much do anything when I put my mind to it – sound familiar?Arrogant? Perhaps a little but I’ll describe myself as self assured.

That said, I’ll let you into a secret, that this “i can do anything” does not extend to singing and dancing which my kids will happily tell you!

I do however have a bit of experience in DIY building. I’ve embarked on a few building projects over the last few years – I work from home so built a 35sqm office in my back garden from scratch and that is still standing 6 years on!

With young kids getting down the local pub was a bit of a challenge so I converted my summerhouse into a pub which is pretty cool when friends and family are round.

When I wanted to put a Hot Tub in the back garden, after sizing it up, it was just not going to fit, however hard I tried. Not because of the space, just the fact that there are a few tight corners that even up ended, on its side, a regular hot tub would just not going to get through.

We have high fences so it couldn’t come through a neighbours garden either and there is no access from the rear of my property. Having a crane do the job and drop it in apart from looking a bit of a “tool” in front of the neighbours, it wouldn’t actually help either as the tight corners are at the bottom of the garden where I wanted the Tub to go. It was too long for a crane. Being of the mindset that I was not going to let this one go, I had the bright idea that I needed to build one.

The Hot Tubs that I had been in at Health Clubs or Spa Hotels in the past were not the plastic shell type that you see plastered all over the internet. They were solid, rather like a swimming pool.

A hole in the ground a few tiles, I could do that i thought to myself! I knew nothing about building a hot tub so this website is the culmination of the knowledge that I have acquired along the way in building my hot tub.

From my initial research, there were no “how to” guides on the web. A couple of other DIYers had done it and some had posted a few helpful things, but they didn’t cover everything and left me with questions. Therefore, I thought why not write the definitive guide when I’m done?

So, the catchy website title? Yes, it is possible to do. I am testament to this. You can build a high quality Hot Tub yourself. You can also spend a lot more than this too if you wish, but that is totally up to you.

In this website we’ll look at all the aspects I considered and of course some that I should have with hindsight. We’ll also look at where you can save money and some of the things I did right and others that I would change if I ever build another one.

Just a final word before we get going. As i’ve said, I’m not a builder but a keen DIYer. I keep myself reasonably fit and healthy so, before undertaking a project like this, please make sure you are physically able to do so and please do your research and know your own limits!

Fast forward to 2024 and now, I have helped over 1000+ DIYers build hot tubs and plunge pools. My YouTube Channel has 750+ videos, 6K+ subscribers and is watched nearly 2K hours a month. My Pinterest has 20K+ follows and receives millions of views a month. Honestly, from where this started, this is unbelievable. 

I’m here to help you build your own DIY Hot Tub or plunge pool. My methods are tried and tested – just check out the case study section of this site.

I wont be held responsible for any injuries or mistakes – this website is for information purposes only so use it at your own peril!

Best of Luck











andi {at} buildahottub.com

UK Address


Buttmead, Blisworth



Tel – +44 7480071155


USA Address


160 W. Camino Real
Unit #715
Boca Raton, FL 33432

Tel – +1

+1 352 405-6545