Danny first got in touch with me back in May of 2021. What he was looking to do was to build a Pool and a Hot Tub with an overflow.
Rob got in touch with me late last year through the website. Here are some extracts from the email he actually sent.
How to install a swim jet? With space being at a premium in most of our back yards, a counter current or a swim jet is a great addition to a DIY Hot Tub, Swim Spa, Plunge Pool or Cocktail Pool. Traditionally, not even traditionally, normally, these pieces of equipment run into the several thousand of dollars to install.
Jody got in touch with me back in May of this year. He was planning a pool and hot tub combo in his backyard but was getting quoted astronomical amounts of money by pool builders.
In this post, I will review the Hydro Royal Air Source Heat Pump. With many different brands of air source heat pump on the market, why have I closed Hydro Royal for the US market. Quite simple – its made in the USA and comes with a 10 year warranty. Yes, you read that correctly, 10 year warranty! Anybody offering a 10 year warranty on their product has some serious build quality! Let’s take a look at the features of the product and how we can incorporate these into our DIY Hot Tub and Plunge Pool Builds.
I’ve mentioned many times on this blog and on my YouTube Channel that the position of the control room is really important. I actually have a full article here that explains the difference between above ground and below ground control rooms here.
You may think that pipe is just pipe. In the case of Hot Tub Pipe, there are certainly a few things you need to know. In this article I will explain everything you need to know about hot tub pipe. This will make the pipe selection process a lot easier for you.
There are a number of ways in which you can construct your walls for a DIY Hot Tub. The designs that are available in my store are all valid of each of the types of construction I describe below. In this article I am going to focus on the different types of wall construction you can opt for. Before we go any further, I must state I am not a structural engineer and this article has been written from experience rather than qualification.
I chose the Comfortline Heat Pump for my own DIY Hot Tub. I have also supplied this unit to customers too. In this article, I will review the specifications as well as tell you the good and the bad about the unit.
For those of you who are regular readers of the blog or indeed my YouTube Channel, you will know I talk an awful lot about the control room.
The control room is the hub of your hot tub and if you get this portion wrong, then you are going to be in trouble. Worst case, your hot tub just won’t work.