Replace a noisy two-speed pump with a circulation pump and a separate jet pump: why, how to plumb it, and how to reprogram the spa pack.
Author Archives: Buildahottub
Not every topside fault needs a new panel. Here’s what an overlay, a pin and a pack reconfigure can fix, and when replacing the topside is the only option.
Air switches let you control a pump or blower from the water with no electricity at the button. Here’s how they work, why they fail and how to replace one.
Let’s dive into the differences between hot tubs and plunge pools and help you decide which one is the right choice for your setup.
Balboa’s spaTouch Mini is a 2.8in touchscreen topside that fits almost anywhere. Here’s what Balboa told me, what I think, the specs, and what it’s compatible with.
Let’s dive into sand filters and explore how they work, their key components, and a few alternative filtration mediums.
Work out how many pumps your DIY hot tub needs: jet pumps, a circulation pump and one pump per water feature, with the flow maths.
Designing a zero-edge swimming pool can be confusing. Here are a few key things to consider to ensure your build goes smoothly!
If you’re thinking about designing your own DIY hot tub, you’ve come to the right place. Building a hot tub in your backyard is a rewarding project, and with the right approach, you can create the perfect oasis. Here are my top tips to help you design the ultimate DIY hot tub.
Spa pack circuit board dead? Here’s how I decide whether to replace just the PCB or the whole pack, and what to check before you buy either.










